Product Description
This 12 Volt Ogura 80002657 electro-magnetic clutch was designed for a Gresen TC pump.
Electric Clutch Specifications:
- Power: 72 Watts
- Max RPM: 3600
- Max Static Torque: 200 pound-feet
- Volts: 12
- For Pump Shaft Size: 1 inch Straight Keyed with 1/4 inch Keyway
Mounting Bracket 13219 (sold separately)
Notes:
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1280-1310 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off up to four (4) times per minute so that the surfaces can mate together. In most applications 30-50 cycles are required for burnishing. "