This Ogura MMC series electro-magnetic Clutch is dependable, easy to install, and easy to mainntain.
Electric Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3600
- Max Static Torque: 400 pounds-feet
- Volts: 12
- For Pump Shaft Size: "C" 1-1/4 with 5/16 inch Keyway
Mounting Bracket 13256 (sold separately)
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generat the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle the clutch on/off no more than four (4) times per minute so that the surfaces can mate together. In most applications 30 - 50 cycles are required for burnishing."