Product Description
This 12 volt direct-drive Ogura Electro-magnetic clutch provides control over the hydraulic system.
Electric Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3000
- Max Static Torque: 700 pounds-feet,
- Volts: 12
- For Pump Shaft Size: "C" Spline 1-1/4 inch 14T 12/24 DP
Mounting Bracket: 13256 (sold separately)
Notes:
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off up to four (4) times per minute so that the surfaces can mate together. In most applications 30-50 cycles are required for burnishing.
