Product Description
This 12 volt Ogura electro-magnetic clutch is part of the Ogura heavy duty MMC series of clutches. They are dependable, easy to install and easy to maintain.
Electric Clutch Specifications:
- Amp Draw: 7.6
- Max RPM: 3000
- Max Static Torque: 1000 pound-feet
- Volts: 12
- For Pump Shaft Size: ""C"" 1-1/4 inch with 5/16 inch Keyway
Mounting Bracket 13258 (sold separately)
Notes:
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generat the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle the clutch on/off no more than four (4) times per minute so that the surfaces can mate together. In most applications 30 - 50 cycles are required for burnishing.
