Product Description
Use this direct drive Ogura Electro-magnetic Clutch for your hydraulic pump control.
Electric Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3600
- Max Static Torque: 400 pounds-feet
- Volts: 24
- For Pump Shaft Size: "C" Splined 1-1/4 inch 14T 12/24 DP
Mounting Bracket 13256 (sold separately)
Notes:
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off up to four (4) times per minute so that the surfaces can mat together. In most applications 30-50 cycles are required for burnishing.
