Product Description
This heavy duty compact MMC series electro-magnetic clutch is used in many applications, including the hydraulic systems on commercial fishing and parasail boats. (MMC-28E-07)
Electric Clutch Specification:
- Power: 72 Watts
- Max RPM: 3600
- Volts: 12,
- Max Static Torque: 200 pound-feet
- For Pump Shaft Size: ""B"" Spline 13T
Mounting Bracket 13219 (sold separately)
Note:
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1280-1310 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees. A Driveshaft Alignment Tool is available for this purpose (sold separately).
Important Installation Step: Clutches require a short burnishing period to generat the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle the clutch on/off no more than four (4) times per minute so that the surfaces can mate together. In most applications 30 - 50 cycles are required for burnishing.
