Product Description
This 24 Volt Ogura Electro-magnetic clutch will give your operator control over your hydraulic system.
Electric Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3000
- Max Static Torque: 1000 pounds-feet
- Volts: 24
- For pump Shaft Size: ""C"" Spline 1-1/4 inch 14T 12/24 DP
Mounting Bracket 13256 (sold separately)
Notes: Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step:
Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off up to four (4) times per minute so that the surfaces can mate together. In most applications 30-50 cycles are required for burnishing.
