Product Description
Use this adaptable, dependable, easy to install electric clutch.
Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3600
- Max Static Torque: 400 pounds-feet
- Volts: 12
- For Pump Shaft Size: ""C"" Spline 1-1/4 inch 14T 12/24 DP
Mounting Bracket 13256 recommended for new installation or if replacement bracket is needed (sold separately).
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
