Product Description
This heavy duty Pitts electro-magnetic Clutch functions from the DC voltage circuit and a simple flick of a switch to give the operator instant on/off control of a hydraulic system.
Clutch Specifications:
- Power: 72 Watts
- Max RPM: 3600
- Max Static Torque: 200 pound-feet
- Pump Shaft Size: 7/8 inch with 1/4 inch Keyway
Mounting Bracket 13219 recommended for new installations and if a replacement bracket is needed (sold separately)
Pitts Clutch Catalog - Diagram for this clutch is on page 17.
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1280-1310 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1290 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
