Product Description
This shaft driven Pitts electro-magnetic clutch is adaptable, dependable and easy to install and maintain.
Electric Clutch Specification:
- Power: 72 Watts
- Max RPM: 3600
- Volts: 12
- Max Static Torque: 200 pound-feet
- For Pump Shaft Size: 1 inch with 1/4 inch Keyway
Mounting Bracket 13219 recommended for new installations and as a replacement bracket (sold separately).
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1280-1310 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
Pitts Clutch Catalog - Diagram for this clutch on page 17.
