Product Description
This Pitts 13418 electro-magnetic Clutch is designed for a Gresen TC pump only.
Electric Clutch Specifications:
- Power: 72 Watts
- Max RPM: 3600
- Max Static Torque: 200 pound-feet
- Volts: 12
- For Pump Shaft Size: 1 inch Straight Keyed with 1/4 inch Keyway
For Green Pump
Mounting Bracket 13219 recommended for new installations and as a replacement bracket (sold separately).
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1310 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
Pitts Clutch Catalog - Diagram for this clutch on page 19.
