Product Description
This 12 volt Pitts electro-magnetic Clutch is dependable, and easy to install and maintain.
Clutch Specifications:
- Amp Draw: 7.6
- Max RPM: 3000
- Volts: 12
- Max Static Torque: 1000 pound-feet
- For Pump Shaft Size: ""C"" 1-1/4 inch with 5/16 inch Keyway
Mounting Bracket 13258 recommended for new installations and when a bracket is needed during installation of a replacement clutch (sold separately).
Pitts Clutch Catalog - Diagram for this clutch is on page 33.
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1410 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1290 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
