Product Description
This Pitts Electro-magnetic Clutch is a dependable solution for hydraulic pump drive control.
Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3600
- Max Static Torque: 400 pounds-feet
- For Pump Shaft Size: ""B"" Splined 7/8 inch 13T 16/32 DP
Mounting Bracket 13258 recommended for new installations and when a new bracket is needed during a clutch replacement (sold separately).
Pitts Clutch Catalog - Diagram for this clutch is on page 25.
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1290 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
