Product Description
Use this shaft driven Pitts Clutch for your hydraulic pump drive control.
Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3600
- Max Static Torque: 400 pounds-feet
- Volts: 24
- For Pump Shaft Size: "C" 1-1/4 inch with 5/16 inch Keyway
Mounting Bracket 13256 recommended for new installation and when a replacement bracket is needed (sold separately).
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1290 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
