Product Description
This Pitts Electro-magnetic direct drive Clutch will give the operator instant on/off control over their hydraulic system with the simple flick of a switch.
Electric Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3000
- Max Static Torque: 700 pounds-feet
- Volts: 24
- For Pump Shaft Size: c Spline 1-1/4 inch 14T 12/24 DP
Mounting Bracket 13256 (sold separately)
Pitts Clutch Catalog - Diagram for this clutch on page 29.
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
