Product Description
This heavy-duty Pitts Electro-magnetic Clutch can give your operator control over your hydraulic system and is designed to fit a SAE D face hydraulic pump or hydraulic motor.
Electric Clutch Specifications:
- Power: 84 Watts
- Max RPM: 3000
- Max Static Torque: 1500 pound-feet
- Volts: 12
- For Pump Shaft Size: 'D' Spline 1-3/4 inch 13T 8/16 DP
Mounting Bracket 14219 (sold separately)
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1550 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
Pitts Clutch Catalog - Diagram for this clutch is on page 37.
