Product Description
This high-torque Pitts Electric Clutch with will give your operator control over your hydraulic system. Made in America.
Clutch Specifications:
- Power: 84 Watts
- Max RPM: 3000
- Max Static Torque: 2000 pound-feet
- For Pump Shaft Size: ""D"" Spline 1-3/4 inch 13T 8/16 DP
Mounting Bracket: 14219 (sold separately)
Pitts Clutch Catalog - Diagram for this clutch is on page 39.
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with "Spicer" type 1550 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 2000 RPM. Cycle on/off at the rate of 5 seconds on-5 seconds off for a total of 25 cycles.
