Product Description
This Direct Drive Ogura Electro-magnetic clutch clutch will give you dependable hydraulic pump control.
Electric Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3000
- Max Static Torque: 1000 pounds-feet
- Volts: 12
- For pump Shaft Size: "C" Spline 1-1/4 inch 14T
Mounting Bracket 13256 (sold separately)
Notes: This clutch is not designed for a Spencer Bracket. If you have a Spencer Bracket, see Ogura Clutch 80004332-B.
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1410 series drive shaft flange connections. Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step:
Clutches require a short burnishing period to generat the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle the clutch on/off no more than four (4) times per minute so that the surfaces can mate together. In most applications 30 - 50 cycles are required for burnishing.
