Product Description
Use this shaft driven Pitts Clutch to drive your hydraulic pump. This heavy duty compact electro-magnetic 24 Volt DC clutch will give your operator control over the hydraulic system.
Clutch Specifications:
- Power: 48 Watts
- Max RPM: 3600
- Max Static Torque: 90 pound-feet
Mounting Bracket 13195 recommended for new installations and when a bracket is needed during a clutch replacement (sold separately).
Pitts Clutch Catalog - Diagram for this clutch on page 12.
Drive flange bolt pattern and pilot diameter on clutch are dimensional to correlate with ""Spicer"" type 1000-1100 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with drive shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important Installation Step: Clutches require a short burnishing period to generate the rate torque. To burnish, install the clutch and run at 1000 to 1290 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
